Niscomed CMS 8000 Multi Parameter Patient Monitor

Features:
Screen size: 12.1" LCD Display Auto power-off Dual measuring modes

Rs. 44,934.40 Rs. 44,100.00(includes GST of Rs. 4,814.40)

Get SmartCash points on this purchase

  Dispatched by Sun, Mar 24
Seller: MD Labs
Check availability at your pincode

Request to Buy

Order value over 20,000/-?

REQUEST BULK QUOTE
Description

- The Niscomed CMS 8000 Multi Parameter Patient Monitor has a high resolution 12.1” colour TFT display

- The patient monitor is light in weight, compact and portable

- The patient monitoring device allows for 32 second full disclosure waveform review

- The patient monitoring machine can store 500 NIBP measurement data which can be recalled as per the requirement

- The data and waveforms colour can be adjusted

- The patient monitor is equipped with a built-in rechargeable lithium battery

- The monitoring system allows a 7-leads display of ECG waveforms on the same screen

- Technical Specifications for ECG:

- 5-lead or 12-lead selectable
- Input: 5-lead: RA; LA; RL; LL; V or R; L; N; F; C
- Lead selection: I; II; III; avR; avL; avF; Vx; CAL
- Gain selection: ×0.25,×0.5,×1,×2,auto
- Sweep speed: 12.5mm/s, 25mm/s, 50mm/s
- Accuracy: ±1bpm or ±1%, whichever is greater
- Protection: Withstand 4000V AC/50Hz voltage in isolation against electrosurgical and defibrillation
- Calibration signal: 1mV±5%
- Operation modes: Diagnostic, Monitor, Surgery
- Heart rate range: Adult: 15-300bpm Paediatric/ Neonatal: 15-350bpm
- Measurement range: -2.0mV~2.0mV
- S-T detection: YES, Arrhythmia analysis: YES
- Alarm: YES, audible and visual alarm, alarm events recallable

- Technical Specifications for NIBP:

- Method: Oscillometry
- Operation modes: Manual/Automatic/STAT
- Measurement unit: mmHg/KPa selectable
- Gain selection: ×0.25,×0.5,×1,×2,auto
- Measurement types: Systolic, Diastolic, Mean
- Measurement range: Adult: 10-270mmHg
- Over-pressure protection: YES
- Resolutionl: 1mmHg
- Accuracy: The mean error shall be less than ±5 mmHg ,the standard deviation shall be less than ±8mmHg
- Alarm: Systolic,Diastolic,Mean

- Technical Specifications for SPO2:

- Measurement range: 0-100%
- Accuracy: ±2%(70~100%);0~69% unspecified
- Alarm range: 0-100%

- Technical Specifications for Respiration:

- Method: RA-LL impedance
- Measurement range:Adult: 0-120rpm, paediatric/neonatal:0-150rpm
- Apnea alarm: YES

- Technical Specifications for IBP:

- Channel: 2 channels
- Pressure transducer:Sensitivity: 5( mV/V/mmHg)
- Transducer sites: ART, PA, CVP, RAP, LAP, ICP
- Alarm range: -10~300mmHg

- Vital signs are an important component of patient care. They determine which treatment protocols to follow, provide critical information needed to make life-saving decisions, and confirm feedback on treatments performed. Accurate, documented vital signs are a very important part of EMS (Emergency Medical Support) and to monitor the same; Patient Monitoring Systems are manufactured

- Patient Monitoring systems are designed to help enhancing the patient care and improve clinical performance. This comprehensive solution fits securely into the hospital's IT environment to capture timely patient data and feed it securely to the EMR (Electronic Medical Record).

- A patient monitor is an electronic medical device that consists of one or more monitoring sensors, a processing component, and a screen display (also called a "monitor") that provide and record for medical professionals a patient's medical vital signs like body temperature, blood pressure, pulse rate etc..

- Patient monitoring systems are used in hospitals, nursing homes, emergency care centres and health care set ups to monitor and review the vital physiological signs of a patient. Most patient monitoring systems are able to monitor the patient’s respiration, oxygen saturation in blood, invasive and non invasive blood pressure, electrocardiograph, body temperature etc.. Various sensors and electrodes are used to measure these signs including the ECG electrodes, SpO2 finger sensor, blood pressure cuff, temperature probe etc..

Shipping & Delivery

Returns:

To return an item, customers must notify us through our Website or by email and a prompt response is assured to such notifications. Once the Product return/complaint request has been raised by you, AMPL shall initiate a process to vet the request and proceed accordingly.

The option to return will be allowed to you at the sole discretion of AMPL, and such requests may only be considered in the following cases:  

  1. Products were received in a damaged condition; 
  2. Products were received in packaging that had already been opened; 
  3. Due to a Product complaint after verification by AMPL; 
  4. When Product is received with remaining expiry period of less than 6 months from date of dispatch or in the event that only 50% or less of shelf life is remaining from date of receipt whichever is lesser (unless already confirmed and agreed by the customer);  
  5. Incorrect order processing, where you have placed an order for one item code but a different item code was dispatched by AMPL; 
  6. Shipment of short quantity; 
  7. When the time period since order confirmation exceeds 30 days - the order is automatically cancelled and a refund (where applicable) is initiated; 
  8. The customer is required to initiate a return request with 7 days of receipt of the product; 
    • Refunds are applicable for products received in un-opened and un-used condition.
    • If opened but returned in the original packing and working condition, customer will be eligible for credit note/ replacement of same or greater value.
  9. When an order has been confirmed and not yet been shipped, the customer can cancel the order from the order tracking mechanism.
  10. For orders > Rs. 20,000, products can only be fully exchanged, not refunded in case of any manufacturing defect or damage during transit.
  11. Rehabilitation products are not eligible for returns, refunds or replacements. In case of a manufacturing defect, damage in transit or incorrect product shipment, the product will be eligible for replacement only.

In any of the above cases, after due verification from AMPL's end if required:

  1. If payment has been made by credit card / debit card through the designated payment gateway, then the refund amount will be reversed back to your credit card / bank account within 15 days of receipt of the returned goods. Sometimes financial organizations take a longer time to process the refund request. 
  2. If payment has been made by a NEFT / RTGS transfer has been made then the refund amount will be reversed back to your bank account within 15 days of receipt of the returned goods; 
  3. If payment has been made by Cash on Delivery method then the refund amount will be transferred to your bank account (as per bank account details provided by you) within 15 days of receipt of the returned goods;

Shipping:

AMPL endeavours but does not guarantee to deliver the products to customers within 10 business days from the date of placing your order depending upon the shipping location. Factors such as delay in delivery through the courier partner, transporters' strike etc. may also affect delivery timelines. AMPL will not be liable for any loss or expenses sustained by the Buyer arising from any delay in the delivery of the Products howsoever caused.
  • AMPL reserves the right to make delivery of the products order in partial shipments. If the Products are to be delivered in instalments, each delivery will constitute a separate contract. You may not treat the contract (as a whole) as repudiated if AMPL fails to deliver any one or more of the instalments or if you have a claim in respect of any one or more of the instalments.
  • If a customer fails to take delivery of the Products, AMPL may at its discretion charge you for the additional shipping cost.
  •