3M RelyX Dental Ceramic Primer

Features:
Volume: 5 ml Silane-based Primer Works with Pre-cured Composites Enhances Bonds to Metal Surfaces

Rs. 941.92 Rs. 1,900.00(includes GST of Rs. 100.92)

Get SmartCash points on this purchase

Notify me when this product is in stock



Description

- The 3M RelyX Dental Ceramic Primer is a prehydrolyzed, silane-based primer designed to enhance bonds to porcelain, ceramic, pre-cured composite and metal surfaces

- The dental primer is a patented alcohol solution of a stabilized, active silane coupling agent

- Indications:

- Silanization of ceramic or metal restorations before cementation

- Silanization of metal or ceramic during repairs of ceramic

- Chairside repair of damaged ceramic crowns and bridges

- It can chemically unite with porcelain surfaces to give an improved, more water-resistant bonding of dental adhesives

- The primer creates strong and reliable bonds both to wet and dry surfaces

- Precautions for Patients:

- This product contains substances that may cause an allergic reaction by skin contact in certain individuals

- Avoid use of this product in patients with known acrylate allergies

- If prolonged contact with oral soft tissue occurs, flush with large amounts of water

- If allergic reaction occurs, seek medical attention as needed, remove the product if necessary and discontinue future use of the product

- The ceramic primer must be used with a dental bonding system

- It is available in 5 ml vial

- Precautions for Dental Personnel:

- This product contains substances that may cause an allergic reaction by skin contact in certain individuals

- To reduce the risk of allergic response, minimize exposure to these materials

- In particular, avoid exposure to uncured product

- If skin contact occurs, wash skin with soap and water

- Use of protective gloves and a no-touch technique is recommended

- Acrylates may penetrate commonly used gloves

- If product contacts glove, remove and discard glove, wash hands immediately with soap and water and then re-glove

- If allergic reaction occurs, seek medical attention as needed

- Instructions for Use:

- Preparation:

- For porcelain repairs, determine the cause of failure. Failures resulting from a structural deficiency or excessive occlusion should be corrected

- Select the appropriate shade of 3M ESPE restorative using normal color matching procedures

- Isolate the porcelain facing or crown to be repaired. A rubber dam is the preferred method of isolation

- Thoroughly prophy the teeth to be repaired with a slurry of plain pumice and water

- Porcelain Preparation: Use a diamond to remove all weakened porcelain and roughen the surfaces to be bonded. Bevel the margin and remove 1 mm of surface glaze beyond the margin

- Metal Preparation: Roughen any areas of exposed metal. Do not remove retention beads if present. Provide as much mechanical retention as possible

- Directions:

- Use phosphoric acid etchant to clean the prepared porcelain and any exposed metal surfaces. Apply the etchant to these surfaces. Wait 15 seconds. Rinse thoroughly for 15 seconds. Dry with air that is oil and water free.

- Porcelain and metal priming: Using a brush or mini-sponge apply RelyX Ceramic Primer to the prepared surface and dry. Note: For best results, repeat etching and priming steps when the primed porcelain or metal surfaces become contaminated with anything

- Adhesive Application: With a brush or mini-sponge apply a uniform coating of adhesive to the primed porcelain and metal surfaces

- Adhesive Curing: Cure the adhesive by exposure to light from a 3M ESPE light curing unit or other dental visible light curing unit of comparable intensity. Cure each area for the time specific in the adhesive instructions

- Mask any exposed metal surfaces. Cure the masking agent.

- Place and cure the appropriate shade of restorative material

- Occlusion: Carefully adjust occlusion to minimize stress on the repair. Note: In the course of a porcelain repair, if any enamel and/or dentin surfaces are exposed, they must be prepared for bonding. Refer to the instructions pertaining to the chosen adhesive.

- Porcelain Veneers: Apply RelyX Ceramic Primer to the internal (etched) surfaces of the veneers. To a clean, etched surface, one application is sufficient. Gently blow oilfree air across the surface or allow the solvent to evaporate completely.

- Proceed with try-in and bonding of the veneers using the adhesive and luting material of choice

Shipping & Delivery

Returns:

To return an item, customers must notify us through our Website or by email and a prompt response is assured to such notifications. Once the Product return/complaint request has been raised by you, AMPL shall initiate a process to vet the request and proceed accordingly.

The option to return will be allowed to you at the sole discretion of AMPL, and such requests may only be considered in the following cases:  

  1. Products were received in a damaged condition; 
  2. Products were received in packaging that had already been opened; 
  3. Due to a Product complaint after verification by AMPL; 
  4. When Product is received with remaining expiry period of less than 6 months from date of dispatch or in the event that only 50% or less of shelf life is remaining from date of receipt whichever is lesser (unless already confirmed and agreed by the customer);  
  5. Incorrect order processing, where you have placed an order for one item code but a different item code was dispatched by AMPL; 
  6. Shipment of short quantity; 
  7. When the time period since order confirmation exceeds 30 days - the order is automatically cancelled and a refund (where applicable) is initiated; 
  8. The customer is required to initiate a return request with 7 days of receipt of the product; 
    • Refunds are applicable for products received in un-opened and un-used condition.
    • If opened but returned in the original packing and working condition, customer will be eligible for credit note/ replacement of same or greater value.
  9. When an order has been confirmed and not yet been shipped, the customer can cancel the order from the order tracking mechanism.
  10. For orders > Rs. 20,000, products can only be fully exchanged, not refunded in case of any manufacturing defect or damage during transit.
  11. Rehabilitation products are not eligible for returns, refunds or replacements. In case of a manufacturing defect, damage in transit or incorrect product shipment, the product will be eligible for replacement only.

In any of the above cases, after due verification from AMPL's end if required:

  1. If payment has been made by credit card / debit card through the designated payment gateway, then the refund amount will be reversed back to your credit card / bank account within 15 days of receipt of the returned goods. Sometimes financial organizations take a longer time to process the refund request. 
  2. If payment has been made by a NEFT / RTGS transfer has been made then the refund amount will be reversed back to your bank account within 15 days of receipt of the returned goods; 
  3. If payment has been made by Cash on Delivery method then the refund amount will be transferred to your bank account (as per bank account details provided by you) within 15 days of receipt of the returned goods;

Shipping:

  • AMPL offers Free Delivery on all orders above the value of Rs. 2,000. A flat delivery fee of Rs 100 will be applicable for all orders below the total value of Rs. 2,000*.  
    *Some select products below the value of Rs. 2,000 may include free delivery as stated on the product page. 
  • AMPL endeavours but does not guarantee to deliver the products to customers within 10 business days from the date of placing your order depending upon the shipping location. Factors such as delay in delivery through the courier partner, transporters' strike etc. may also affect delivery timelines. AMPL will not be liable for any loss or expenses sustained by the Buyer arising from any delay in the delivery of the Products howsoever caused.
  • AMPL reserves the right to make delivery of the products order in partial shipments. If the Products are to be delivered in instalments, each delivery will constitute a separate contract. You may not treat the contract (as a whole) as repudiated if AMPL fails to deliver any one or more of the instalments or if you have a claim in respect of any one or more of the instalments.
  • If a customer fails to take delivery of the Products, AMPL may at its discretion charge you for the additional shipping cost.